9800 – Wave 1 AP support
If you are using Cisco 9800, you know that Cisco stopped supporting Wave 1 (17xx/27xx/37xx) APs beyond 17.3.x codes. Here …
Category Archives: WLC Management
Cisco – WLC Config Analyzer
As listed in my previous post Cisco has developed many tools to assist us in Cisco WiFi deploymets. Here is …
9800-TACACS
In this post, we will look at the AAA config for 9800 device administration. Even though most of these config …
CIMC Upgrade – WLC in HA
In this post we will look at CIMC upgrade process of WLC HA pair. If you have not deployed WLC …
CIMC Upgrade – 8540/5520 WLC
If you are familiar with Cisco UCS servers, you may be already familiar with CIMC upgrade procedure. If not this …
Are You Ready for AireOS 8.1 ?
Cisco has published initial release (8.1.102.0) of AireOS 8.1 code. In this post we will look at what it brings …
How to go there – PI 2.2
Cisco has released Prime Infrastructure 2.2 today, a version long awaited by many of us. ISE 1.3, IOS-XE3.7, AeroOS-8.0 is …
WLC Syslog Analysis
How do you proactively (prior to user complaints) identify wireless related issues in your environment ? Almost every one of …
WLC Access via RADIUS (ACS 5.x)
In this post we will see how to control WLC access via RADIUS, where ACS 5.2 used as the RADIUS …
WLC Access via RADIUS (ISE)
In this post we will see how to control access to a WLC using a RADIUS server. I have used …
mrn-cciew 