Split MAC vs Local MAC Architecture
With Split MAC , the 802.11 protocol functionality is divided between AP & WLC. Below diagram shows how Split MAC …
Author Archives: nayarasi
PEAP & EAP-FAST with ACS 5.2
In this post we will see how to configure PEAP & EAP-FAST on two WLANs in a controller. ACS 5.2 …
EAP Overview
To improve the security of Authentication phase in wireless client connections 802.1X & EAP (Extensible Authentication Protocol) has been introduced …
Autonomous AP with LEAP Security
In this post we will expand our previous configuration ( Pls read AP as Local Radius post before this) to …
Autonomous AP as Local Radius Server
In small wireless network (Autonomous) there may not be Radius server available for 802.1x authentication.In a situation like this you …
Autonomous AP with WPA-PSK Security
In this post, we will see how to configure WPA-PSK (WiFi Protected Access – Pre Shared Key). WPA key management …
Autonomous AP with WEP Security
In this post we will see how we can add security into SSID configured in Autonomous AP. Here is the …
Configuring Dynamic Interfaces on WLC
What is the fastest & easiest way to configure multiple dynamic interfaces on a WLC. If you need to do …
Learning CLI in Quick Time
I found below post from http://leigh-wireless.blogspot.com.au/ which is really useful to learn WLC CLI commands in quick time. WLC-GUI-CLI-Command Reference …
MSDP with Anycast RP
Usually MSDP (Multicast Source Discovery Protocol) is used for inter-domain (different BGP Autonomous Systems) multicast deployments. We can use this …
mrn-cciew 