Per User Rate Limit in WLAN
In this post we will look at how to control per user bandwidth in wireless environment. This is based on …
Previous articles
WGB with CAPWAP
Since WGB AP acting as client, it can be associated to any (Autonomous or Lightweight) other AP. In this post …
WGB with EAP-FAST
In this post we will see how to configure security for basic Autonomous WGB solution. Here is the topology I …
NTP Basics
Network Time Protocol (NTP) is used to synchronize a device clock with external NTP server. You can configure a Cisco …
Configuring TACACS on WLC
In this post we will see how to configure TACACS on a WLC. (I am using ACS 5.2 as TACACS …
WLC Admin Access via TACACS
In this post we will see how to control access to WLC for different type of users using TACACS (ACS …
Configuring HSRP
Hot Standby Routing Protocol (HSRP) is Cisco standard of providing redundancy for IP host configured in a LAN network with …
802.11 Frame Format
The MAC frame format comprises a set of fields that occur in a fixed order in all frames. Below picture …
Configuring Authentication in AAP
In Autonomous AP configurations, authentications type configured under SSID section.Below shows the configuration options available for authentication. AAP1(config-ssid)#authentication ? …
Configuring EAP-TLS on WLC
In this post we will see how to configure EAP-TLS on a wireless controller.It is assumed that you have a …
mrn-cciew 